Short answer: home offices are a glare problem before they are a privacy problem. Solar shades with the right openness factor cut screen glare while keeping the view, which is what most people actually want at a desk.
The rest of this covers the options that actually work in that situation, what to decide before you order, the mistakes we get called out to fix, and how the Texas sun should change your choice.
What works, and why
Solar shades
Cut glare without darkening the room. Openness factor is chosen for which way the window faces, tighter for west, more open for north.
Dual or day-night shades
A solar layer for working hours and a blackout layer for video calls or afternoon sun. One treatment, two jobs.
Motorized with a schedule
The shades handle the afternoon sun without you getting up mid-call. This is the feature home office clients say they would not give up.
What to avoid
Anything that makes the room dark enough to need lights on all day, which usually makes screen glare worse rather than better.
What to decide before you order
- Where the screen sits relative to the window
- Whether the window is behind you on video calls
- Which way the room faces and when it takes direct sun
- Whether the room doubles as a guest room and needs blackout too
Material, and why it matters more than style
The format of a treatment is a look. The material is what decides whether it still works in three years. Getting this wrong is the most expensive mistake available, because a custom treatment is not returnable and a warped one gets replaced.
Real wood
Lightest, takes stain beautifully, and belongs in dry living areas. It moves with humidity, so it is the wrong answer near a shower or a sink.
Faux wood and composite
Handle moisture and hard sun without warping. Heavier, which matters on a wide span, but they are why most Texas kitchens and bathrooms end up with them.
Fabric shades
Softer and warmer in a room, and the only option where openness factor lets you tune view against shade. Choose a weave rated for sun on a hot wall.
Vinyl and aluminium
Cheapest, and they behave like it on a west facing window. Fine on a shaded north opening in a room nobody uses.
Light control, privacy and the night time problem
Daytime privacy and night time privacy are different problems, and a lot of disappointment comes from assuming one treatment solves both. A weave that gives perfect privacy at noon can go transparent once the lights are on inside.
- Decide per window whether you need light filtering, room darkening or blackout
- Check whether the window needs to work after dark, not just during the day
- Remember that any inside mount leaks light at the edges, by design
- Layering a shade under a drape solves most cases that one product cannot
Mistakes we get called out to fix
- Blackout on a north facing office, which just means lights on all day
- A shade that is see-through at night when the desk lamp is on
- Glare handled by tilting a blind, which cuts the view as well as the glare
- Manual shades on a window behind the desk you have to climb over to reach
The Texas factor
West and south facing glass takes the worst of the afternoon here, and it is the single thing that should drive the specification. A treatment that is perfect on a north window can fade, warp or simply fail to do its job on a west wall.
- Check which way each window faces before choosing material
- Moisture rules bathrooms and kitchens: faux wood or composite, not real wood
- Anything on the hot side should be specified for sun, not chosen on looks
- Shading the outside of the glass beats shading the inside, every time
How we would approach it
At the consultation we look at which way the window faces, what the room is used for, how the opening is built and whether it is square and deep enough for the mount you want. Then we measure every opening ourselves and quote from those measurements.
- Samples brought to your home so you see them in your own light
- Every opening measured on site rather than estimated
- A written quote based on those measurements
- Installation by the same team that measured
- Remade at no cost if it does not match the approved measurements
Let us measure it
The consultation is free, we bring samples you can hold against your own light, and we measure every opening on site. You get a written quote from those measurements.
